MachineVac NED

MachineVac NED

Part Number: MV2000NED

  • MV2000NED

  • MV2000NED

  • MV2000NED

1 3
$1,683.87 USD
$1,683.87 USD
Sale Sold out

Powered by standard shop compressed air, the powerful MachineVac NED (Non-Electrical Discharge) quickly and effectively vacuums up dry and wet materials to keep your workspace clean. Constructed from electrically conductive components, the MachineVac NED suppresses the buildup of static charges for safe use with combustible materials commonly found in manufacturing, chemical, and food processing facilities. Static conductive vacuum and air supply hose ensure static suppression. With no electric motor to burn out, the MachineVac NED is virtually maintenance-free. Includes pre-drilled mounting plate for mounting the unit on vertical surfaces, thereby saving valuable factory floor space. Grounding lug provides extra degree of safety. Proudly made in USA.

MACHINEVAC NED is not approved for use in CLASS 1, 2, or 3 HAZARDOUS LOCATIONS as defined by the National Fire Protection Association (NFPA).

View full details
  • 5.5 gallon, static conductive polyethylene container
  • Standard cartridge filter (77% efficient @ 0.8 microns)
  • Bottom drain plug
  • Pre-drilled, steel vertical mounting plate
  • 1-1/2" ID x 10' static conductive vacuum hose
  • Aluminum crevice tool
  • 3⁄8” ID x 20’ static conductive air hose
  • Shutoff valve with 3⁄8” FNPT inlet
  • (1) MachineVac NED
  • (1) Mounting Plate w/ Hardware
  • (1) 1-1/2" ID x 10' Vacuum Hose
  • (1) Crevice Tool
  • (1) 20' Static Conductive Air Supply Hose
  • (1) Grounding Lug
    • 5.5 gallon, static conductive polyethylene container
    • Standard cartridge filter (77% efficient @ 0.8 microns)
    • Bottom drain plug
    • Pre-drilled, steel vertical mounting plate
    • 1-1/2" ID x 10' static conductive vacuum hose
    • Aluminum crevice tool
    • 3⁄8” ID x 20’ static conductive air hose
    • Shutoff valve with 3⁄8” FNPT inlet
  • (1) MachineVac NED
  • (1) Mounting Plate w/ Hardware
  • (1) 1-1/2" ID x 10' Vacuum Hose
  • (1) Crevice Tool
  • (1) 20' Static Conductive Air Supply Hose
  • (1) Grounding Lug
    • Part NumberAir Inlet
    FNPT (in)     		Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Dimensions
    (L" x W" x H")    		Weight (lbs)
    Part Number MV2000NED Air Inlet
    FNPT (in)     3/8     		Min. Compressor Required (hp) 4.7 Noise Level (dB) 88 Flow (cfm) 21 Vacuum Flow (cfm) 73 Vacuum Lift (in H20) 77 Dimensions
    (L" x W" x H")     21.8 x 12.5 x 17     		Weight (lbs) 20.6
    ×