SUPPLY CHAIN CHALLENGES ARE CAUSING DELAYS ON SOME ORDERS.
EXPECT 2+ WEEK PROCESSING TIME PRIOR TO ORDER BEING SHIPPED.

PulseAir™ - Dust Extractor / 20 Gallon Part Number: N201DCNEDPAD

$3,220.45


Powered by compressed air, the PulseAir™ 20-Gallon Vacuum is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

Designed for industrial housekeeping applications with high dust content, PulseAir Vacuums feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Vacuums are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks. Floor and crevice tools are included.  

Powered by compressed air, the PulseAir™ 30-Gallon Vacuum is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

 

Designed for industrial housekeeping applications with high dust content, PulseAir Vacuums feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Vacuums are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks. Floor and crevice tools are included.  

Powered by compressed air, the PulseAir™ 55-Gallon Single Venturi Vacuum is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

 

Designed for industrial housekeeping applications with high dust content, PulseAir Vacuums feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Vacuums are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks. Floor and crevice tools are included.  

Powered by compressed air, the PulseAir™ 55-Gallon Dual Venturi Vacuum is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

 

Designed for industrial housekeeping applications with high dust content, PulseAir Vacuums feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Vacuums are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks. Floor and crevice tools are included.  

Powered by compressed air, the PulseAir™ 20-Gallon Dust Extractor is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

 

Designed for source capture tools, PulseAir Dust Extractors feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Dust Extractors are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks. 

Additional adapter cuff for 1 1/4'' (N626) dust ports also available.   

Powered by compressed air, the PulseAir™ 30-Gallon Dust Extractor is a powerful industrial vacuum incorporating a proprietary, button-activated system engineered to clean the vacuum filter without opening the unit. On demand, a burst of compressed air is injected into the interior of the filter mounted underneath the vacuum lid. Dust particles clogging the outer filter surface are dislodged and settle within the closed container. PulseAir technology enables end-users to meet OSHA Silica Dust Regulation 29 CFR 1926.1153 by preventing dust from escaping into the outside environment thus minimizing operator exposure to dusty filters. Significantly increases vacuum effectiveness, extends filter lifespan, and provides un-interrupted vacuum operation. 

 

Designed for source capture tools, PulseAir Dust Extractors feature a HEPA cartridge filter which captures 99.97% of airborne particles at a minimum of 0.3 microns. Pneumatic PulseAir Dust Extractors are dependable and trouble-free with no motor to spark or burn out, generate exceptional vacuum lift and flow, while operating quietly and efficiently. Static conductive components including vacuum and air supply hose eliminate nuisance shocks.     

Additional adapter cuff for 1 1/2'' (N625) dust ports also available.   

  • PulseAir 20-gallon single venturi vacuum generating head with exhaust silencer
  • 20-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • 20-Gallon Push Dolly
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with ½” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 1 1/2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • (1) PulseAir 20-Gallon Vacuum Generating Head
  • (1) 20-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
  • (1) 20-Gallon Drum Dolly
  • (1) 12" Aluminum Floor Tool with 4' Steel Wand
  • (1) 24" Metal Crevice Tool
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • PulseAir 30-gallon single venturi vacuum generating head with exhaust silencer
  • 30-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • 30-Gallon Push Dolly
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with ½” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • (1) PulseAir 30-Gallon Vacuum Generating Head
  • (1) 30-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
  • (1) 30-Gallon Drum Dolly
  • (1) 12" Aluminum Floor Tool with 4' Steel Wand
  • (1) 24" Metal Crevice Tool
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • PulseAir 55-gallon single venturi vacuum generating head with exhaust silencer
  • 55-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with ½” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • 12" Aluminum floor tool with 4' steel wand
  • 24" metal crevice tool
  • (1) PulseAir Single Venturi 55-Gallon Vacuum Generating Head
  • (1) 55-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
  • (1) 55-Gallon Drum Dolly
  • (1) 12" Aluminum Floor Tool with 4' Steel Wand
  • (1) 24" Metal Crevice Tool
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • PulseAir 55-gallon dual venturi vacuum generating head with exhaust silencer
  • 55-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with ½” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • 12" Aluminum floor tool with 4' steel wand
  • 24" metal crevice tool
  • (1) PulseAir Dual Venturi 55-Gallon Vacuum Generating Head
  • (1) 55-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
  • (1) 55-Gallon Drum Dolly
  • (1) 12" Aluminum Floor Tool with 4' Steel Wand
  • (1) 24" Metal Crevice Tool
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • PulseAir 20-gallon single venturi vacuum generating head with exhaust silencer
  • 20-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • 20-Gallon Push Dolly
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with 1/2” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 1 1/2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • (1) PulseAir Single Venturi 20-Gallon Vacuum Generating Head
  • (1) 20-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 20-Gallon Push Dolly
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

  • PulseAir 30-gallon single venturi vacuum generating head with exhaust silencer
  • 30-Gallon, heavy-duty, static conductive, powder-coated steel drum
  • 30-Gallon Push Dolly
  • HEPA cartridge filter (99.97% efficiency @ greater than 0.3 microns)
  • Washable pre-filter bag
  • Air shutoff valve with 1/2” FNPT inlet and Universal Coupling
  • 3/4" x 20' static conductive air supply hose with Universal Couplings
  • 2" x 20' static conductive standard-duty vinyl vacuum hose with hose cuffs
  • (1) PulseAir Single Venturi 30-Gallon Vacuum Generating Head
  • (1) 30-Gallon Heavy-Duty, Static Conductive Steel Drum
  • (1) 30-Gallon Push Dolly
  • (1) 3/4" x 20' Static Conductive Air Supply Hose with Universal Couplings
  • (1) 2" x 20' Static Conductive Standard-Duty Vacuum Hose with Hose Cuff
Part NumberAir Inlet
FNPT (in)
Min. Compressor Required (hp)Noise Level (dB)Flow (cfm)Vacuum Flow (cfm)Vacuum Lift (in H20)Steel Drum GaugeDimensions
(L" x W" x H")
Weight (lbs)
Part Number N201DCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8
Part Number N551BCNEDPA Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
43.8 x 27.7 x 25.5
Weight (lbs) 111.6
Part Number N552BCNEDPA Air Inlet
FNPT (in)
3/4
Min. Compressor Required (hp) 24 Noise Level (dB) 102 Flow (cfm) 110 Vacuum Flow (cfm) 163 Vacuum Lift (in H20) 163 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
48 x 27.7 x 24.5
Weight (lbs) 119.3
Part Number N201DCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 10 Noise Level (dB) 100 Flow (cfm) 47 Vacuum Flow (cfm) 60 Vacuum Lift (in H20) 213 Steel Drum Gauge 18 Dimensions
(L" x W" x H")
36.3 x 25 x 22
Weight (lbs) 78.4
Part Number N301BCNEDPAD Air Inlet
FNPT (in)
1/2
Min. Compressor Required (hp) 15 Noise Level (dB) 100 Flow (cfm) 68 Vacuum Flow (cfm) 89 Vacuum Lift (in H20) 185 Steel Drum Gauge 19 Dimensions
(L" x W" x H")
38.3 x 24 x 23.3
Weight (lbs) 94.8

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.